啊啊

NEWS CENTER

新聞動態

您現在的位置:
首頁
/
/
污油泥處理方法以及分離機、離心機的作用(Sewage sludge treatment and the role of separator, centrifuge)

污油泥處理方法以及分離機、離心機的作用(Sewage sludge treatment and the role of separator, centrifuge)

  • 分類:新聞資訊
  • 作者:南京莫尼亞離心機科技發展有限公司
  • 來源:http://www.eclecticwhatnot.com
  • 發布時間:2020-12-03
  • 訪問量:736

【概要描述】污油泥是指原油資源開采和集輸過程中可以產生的油、水與泥土等混合形成的非均質多項分散體系,包括企業廢水進行沉降油污泥、管線刺漏污染的油泥砂、聯合站沉降罐油泥砂等。污油泥處理方法以及分離機、離心機的作用:

(Sewage sludge refers to the heterogeneous multi-dispersive system formed by the mixing of oil, water and soil in the process of exploitation and gathering and transportation of crude oil resources, including the settling oil sludge of enterprise wastewater, the oil sludge contaminated by pipeline leakage, and the settling tank oil sludge of joint stations. Sewage sludge treatment method and the role of separator and centrifuge:)

污油泥處理方法以及分離機、離心機的作用(Sewage sludge treatment and the role of separator, centrifuge)

【概要描述】污油泥是指原油資源開采和集輸過程中可以產生的油、水與泥土等混合形成的非均質多項分散體系,包括企業廢水進行沉降油污泥、管線刺漏污染的油泥砂、聯合站沉降罐油泥砂等。污油泥處理方法以及分離機、離心機的作用:

(Sewage sludge refers to the heterogeneous multi-dispersive system formed by the mixing of oil, water and soil in the process of exploitation and gathering and transportation of crude oil resources, including the settling oil sludge of enterprise wastewater, the oil sludge contaminated by pipeline leakage, and the settling tank oil sludge of joint stations. Sewage sludge treatment method and the role of separator and centrifuge:)

  • 分類:新聞資訊
  • 作者:南京莫尼亞離心機科技發展有限公司
  • 來源:http://www.eclecticwhatnot.com
  • 發布時間:2020-12-03
  • 訪問量:736
詳情

離心機

 

污油泥是指原油資源開采和集輸過程中可以產生的油、水與泥土等混合形成的非均質多項分散體系,包括企業廢水進行沉降油污泥、管線刺漏污染的油泥砂、聯合站沉降罐油泥砂等。

Sewage sludge refers to the heterogeneous multi-dispersive system formed by the mixing of oil, water and soil in the process of exploitation and gathering and transportation of crude oil resources, including the settling oil sludge of enterprise wastewater, the oil sludge contaminated by pipeline leakage, and the settling tank oil sludge of joint stations.

 

 

污油泥處理方法以及分離機、離心機的作用:

Sewage sludge treatment method and the role of separator and centrifuge:

 

 

傳統的污泥處理方法有直接填埋法(污泥直接埋入特殊的污泥貯存坑,然后填土,以恢復原有的景觀,使污泥不會暴露在地面,減少對大氣的影響)、注射法(污泥通過相應的鉆孔設備注入底層,以達到減少污染的目的)、固化法(在污泥中加入一定量的固化劑,使固化劑與污泥固化處理)等,上述處理方法對污泥中的有害物質沒有根本的處理作用。處理后的污泥一方面對土壤、地下水等具有潛在的風險,另一方面又會導致污油泥處理中石油資源的浪費。

Traditional sludge treatment methods have direct landfill method (sludge directly into specific sludge storage pit, and then fill, to restore the original landscape, make the sludge not exposed on the ground, to reduce the impact on the atmosphere), injection (sludge through corresponding drilling equipment into the bottom, in order to achieve the purpose of reducing pollution), curing method (add a certain amount of curing agent in the sludge, curing agent and the sludge solidification processing), etc., the processing method of harmful substances in the sludge is no fundamental role. On the one hand, the treated sludge has potential risks to soil and groundwater, and on the other hand, it will lead to the waste of petroleum resources in sewage sludge treatment.

 

 

污油泥的主要處理方式方法可以包括常溫溶劑如分離機作為萃取、化學離心機熱洗處理、焚燒垃圾處理、熱裂解以及處理。常溫溶劑萃取分析技術是指在常溫環境條件下,采用不同溶劑系統進行物理深度分離,從而能夠實現礦物油、乳泥漿化學劑等油基鉆井液回收和油泥無害化處理工作過程;

The main treatment methods of oily sludge can include extraction with normal temperature solvent such as separator, chemical centrifuge hot washing treatment, incineration of waste, thermal cracking and treatment. Normal temperature solvent extraction and analysis technology refers to the process of using different solvent systems for physical depth separation under normal temperature environment, so as to realize oil based drilling fluid recovery and harmless treatment of oil sludge, such as mineral oil and emulsion mud chemical agent.

 

 

化學熱洗處理是指通過化學藥劑和熱水共同放入離心機作用于含油污泥,使其粘度降低,實現油、水、固體三相分離的處理這個過程;焚燒處理是指在高溫和富氧條件下,使含油污泥得到充分利用燃燒、徹底分解的過程;

Chemical hot washing treatment refers to the process of three-phase separation of oil, water and solid by putting chemical agents and hot water into a centrifuge and acting on oily sludge to reduce its viscosity. Incineration treatment refers to the process of making full use of oily sludge under high temperature and oxygen-enriched conditions for combustion and thorough decomposition.

 

 

污油泥熱處理是指含油污泥在隔氧高溫條件下,將油相經蒸餾、熱分解、縮合等過程數據進行轉化、分離與回收,最終目標實現城市污泥土地資源化、減量化、無害化的處理管理過程。

Sewage sludge heat treatment refers to the process of transforming, separating and recovering the oil phase data through distillation, thermal decomposition, condensation and other processes under the condition of oxygen isolation and high temperature, with the ultimate goal of realizing the resource utilization, reduction and harmless treatment and management process of urban sludge land.

關鍵詞:

掃二維碼用手機看

污油泥處理:下面介紹下含油污泥處理工藝概述
污油泥處理:下面介紹下含油污泥處理工藝概述   目前,中國含油污泥處理解決企業所選用的關鍵工藝有:熱處理工藝、熱洗、催化裂解、苛化、集中焚燒處理及制得浮選劑。之上處理解決企業在含油污泥儲存、處理解決的狀況下會導致工業廢氣、廢水、污泥及噪聲,對工業廢氣、廢水及污泥務必進行相對應處理,后剩下來的廢水、污泥還需要有的趨勢。因此對含油污泥處理解決企業的監管環節,包括了儲存、加工過程及污染處理機器設備
查看詳情 白箭頭 黑箭頭
污油泥處理的一些好處?(Some benefits of sludge treatment?)
 相信大家也都知道石油和天然氣開采、煉制過程中會產生大量危險廢物。當然在這其中以油泥和油基泥漿為代表,同時產生的往往還有壓裂反排液及含油廢水。國內每年開采石油天然氣產生的污油泥高達幾百萬噸。下面為大家說下污油泥處理的一些好處? I believe you are all aware of the large amount of hazardous waste produced in the process of oil and gas extraction and refining. Of course, the oil mud and oil-based mud are the representative, and the fracturing backdischarge fluid and oily wastewater are often produced at the same time. Domestic oil and gas exploitation produces up to millions of tons of sludge every year. The following for you to say some of the benefits of sewage sludge treatment?
查看詳情 白箭頭 黑箭頭
污油泥處理的常用方法?(What are the common methods of sludge treatment?)
污油泥處理是在石油開采、運輸、煉制及含油污水處理過程中產生的含油固體廢物,其實簡單來時候的話它是油氣開發和儲運過程中產生的主要污染物之一。下面為大家說下污油泥處理的常用方法? Sludge treatment is an oil-bearing solid waste produced in the process of oil exploitation, transportation, refining and oily sewage treatment. In fact, it is one of the main pollutants produced in the process of oil and gas development, storage and transportation. Below for you to say the commonly used method of sewage sludge treatment?
查看詳情 白箭頭 黑箭頭
莫尼亞

南京莫尼亞離心機科技發展有限公司

聯系人:   陳永欣 18013325671 

                 徐鋒    18013035671

售后服務: 趙士波 18013344029
電話/傳真:025-58474011
郵箱: molniya@126.com

網址:www.eclecticwhatnot.com
公司地址:江蘇省南京市六合區竹鎮工業園凌峰路71號

General Sales Agent for Iran, Iraq and Syria:

Company: ROYESH BEDONE MAX.LTD

Contact: Mr. GHASEM AMANI

Telephone number: 0098 912 111 2893

Mail box: robimaxfactory@gmail.com

莫尼亞

- 手機版  莫尼亞 -

Copyright ? 2019 南京莫尼亞離心機科技發展有限公司

網站建設:中企動力 南京

蘇ICP備2020058610號-1

SEO 標簽

幸运快3-通用APP