啊啊

NEWS CENTER

新聞動態

您現在的位置:
首頁
/
/
污水處理中碟片式離心機?、分離機的使用(The use of disc type centrifuge and separator)

污水處理中碟片式離心機?、分離機的使用(The use of disc type centrifuge and separator)

  • 分類:新聞資訊
  • 作者:南京莫尼亞離心機科技發展有限公司
  • 來源:http://www.eclecticwhatnot.com
  • 發布時間:2020-11-24
  • 訪問量:260

【概要描述】礦物油包括輕質、重質燃料油、潤滑油、冷卻油等礦物性碳氫化合物,礦物油可漂浮于水體以及表面,影響環境空氣與水體信息界面氧的交換;也可分散在水中,吸附于懸浮物質顆粒或以乳化技術狀態可以存在于水中的油被水中的微生物通過氧化反應分解,消耗大量水中的溶解氧,使水質不斷惡化。對此問題,可使用碟片式離心機?、分離機來澄清。

(Mineral oil includes light, heavy fuel oil, lubricating oil, cooling oil and other mineral hydrocarbons. Mineral oil can float in water and on the surface, affecting the exchange of oxygen between environmental air and water information. It can also be dispersed in the water. The oil adsorbed in suspended material particles or emulsified technology can exist in the water and be decomposed by microorganisms in the water through oxidation reaction, consuming a large amount of dissolved oxygen in the water, making the water quality deteriorate continuously. To this problem, can use disc type centrifuge, separator to clarify.)

污水處理中碟片式離心機?、分離機的使用(The use of disc type centrifuge and separator)

【概要描述】礦物油包括輕質、重質燃料油、潤滑油、冷卻油等礦物性碳氫化合物,礦物油可漂浮于水體以及表面,影響環境空氣與水體信息界面氧的交換;也可分散在水中,吸附于懸浮物質顆粒或以乳化技術狀態可以存在于水中的油被水中的微生物通過氧化反應分解,消耗大量水中的溶解氧,使水質不斷惡化。對此問題,可使用碟片式離心機?、分離機來澄清。

(Mineral oil includes light, heavy fuel oil, lubricating oil, cooling oil and other mineral hydrocarbons. Mineral oil can float in water and on the surface, affecting the exchange of oxygen between environmental air and water information. It can also be dispersed in the water. The oil adsorbed in suspended material particles or emulsified technology can exist in the water and be decomposed by microorganisms in the water through oxidation reaction, consuming a large amount of dissolved oxygen in the water, making the water quality deteriorate continuously. To this problem, can use disc type centrifuge, separator to clarify.)

  • 分類:新聞資訊
  • 作者:南京莫尼亞離心機科技發展有限公司
  • 來源:http://www.eclecticwhatnot.com
  • 發布時間:2020-11-24
  • 訪問量:260
詳情

 碟片式離心機  分離機

 

 

  礦物油包括輕質、重質燃料油、潤滑油、冷卻油等礦物性碳氫化合物,礦物油可漂浮于水體以及表面,影響環境空氣與水體信息界面氧的交換;也可分散在水中,吸附于懸浮物質顆粒或以乳化技術狀態可以存在于水中的油被水中的微生物通過氧化反應分解,消耗大量水中的溶解氧,使水質不斷惡化。對此問題,可使用碟片式離心機分離機來澄清。

Mineral oil includes light, heavy fuel oil, lubricating oil, cooling oil and other mineral hydrocarbons. Mineral oil can float in water and on the surface, affecting the exchange of oxygen between environmental air and water information. It can also be dispersed in the water. The oil adsorbed in suspended material particles or emulsified technology can exist in the water and be decomposed by microorganisms in the water through oxidation reaction, consuming a large amount of dissolved oxygen in the water, making the water quality deteriorate continuously. To this problem, can use disc type centrifuge, separator to clarify.

 

 

1.離心機必須在設備運行前進行一切調試或操作,以保持穩定和趨于平穩,使離心機在平穩、安全運行的過程中能夠分離。

The centrifuge must be tested or operated before the operation of the equipment in order to maintain stability and tend to be stable, so that the centrifuge can be separated in the process of stable and safe operation.

 

 

2.分離機的運行對工作水的壓力及流量管理也有一定要求。水壓在0.25-0.3Mpa之間,流量要大于工作水的要求。工作水的清潔要求,為了提高設備的清洗水平,要求用戶安裝過濾器。

The operation of separator also has certain requirements on the pressure and flow management of working water. The water pressure is between      0.25 Mpa and 0.3Mpa, and the flow rate should be greater than the requirement of working water. Cleaning requirements for working water. In order to improve the cleaning level of equipment, users are required to install filters.

 

 

3.出口壓力不斷調整,對離心效果的影響。壓力和流量管理關系:流量可以加大,出口壓力要小,反之如此。

Influence of constant adjustment of outlet pressure on centrifugal effect. Pressure and flow management relationship: flow can be increased, outlet pressure should be small, and vice versa.

 

 

4.進出碟片式離心機的水應定期清洗(根據工作用水的清洗情況確定)。

The water in and out of the disc centrifuge should be cleaned regularly (according to the cleaning condition of the working water).

 

 

5.物料管理情況對調整排渣周期及排渣時間的情況(粘度、流度、含固量、流量)。要求用戶要清楚分離物料的具體功能特性,根據不同物料的性質才能做好分離機的基本系統調試主要工作。

Material management conditions for adjusting the slag discharge cycle and time (viscosity, fluidity, solids content and flow rate). Users are required to be clear about the specific functional characteristics of separated materials, according to the nature of different materials in order to do the basic system debugging work of the separator.

 

 

6.清洗設備管路配置及如何清洗設備。 離心機使用前后應進行清洗,保證物料分離效果的有效性。 具體清洗方法的專業操作人員應做好每次使用記錄。

Cleaning equipment piping configuration and how to clean the equipment. The centrifuge should be cleaned before and after use to ensure the effectiveness of material separation. The professional operator of the specific cleaning method should keep a record of each use.

 

 

7.碟片式離心機齒輪軸更換一個周期及液力和器油的調整。養成定期組織檢查技術設備零部件的習慣,如有問題需要通過更換或調整的,應及時有效處理。

Replace the gear shaft of disc centrifuge for one cycle and adjust the hydraulic and oil. Develop the habit of organizing regular inspection of technical equipment parts. If there are any problems that need to be replaced or adjusted, timely and effectively deal with them.

關鍵詞:

掃二維碼用手機看

污油泥處理:下面介紹下含油污泥處理工藝概述
污油泥處理:下面介紹下含油污泥處理工藝概述   目前,中國含油污泥處理解決企業所選用的關鍵工藝有:熱處理工藝、熱洗、催化裂解、苛化、集中焚燒處理及制得浮選劑。之上處理解決企業在含油污泥儲存、處理解決的狀況下會導致工業廢氣、廢水、污泥及噪聲,對工業廢氣、廢水及污泥務必進行相對應處理,后剩下來的廢水、污泥還需要有的趨勢。因此對含油污泥處理解決企業的監管環節,包括了儲存、加工過程及污染處理機器設備
查看詳情 白箭頭 黑箭頭
污油泥處理的一些好處?(Some benefits of sludge treatment?)
 相信大家也都知道石油和天然氣開采、煉制過程中會產生大量危險廢物。當然在這其中以油泥和油基泥漿為代表,同時產生的往往還有壓裂反排液及含油廢水。國內每年開采石油天然氣產生的污油泥高達幾百萬噸。下面為大家說下污油泥處理的一些好處? I believe you are all aware of the large amount of hazardous waste produced in the process of oil and gas extraction and refining. Of course, the oil mud and oil-based mud are the representative, and the fracturing backdischarge fluid and oily wastewater are often produced at the same time. Domestic oil and gas exploitation produces up to millions of tons of sludge every year. The following for you to say some of the benefits of sewage sludge treatment?
查看詳情 白箭頭 黑箭頭
污油泥處理的常用方法?(What are the common methods of sludge treatment?)
污油泥處理是在石油開采、運輸、煉制及含油污水處理過程中產生的含油固體廢物,其實簡單來時候的話它是油氣開發和儲運過程中產生的主要污染物之一。下面為大家說下污油泥處理的常用方法? Sludge treatment is an oil-bearing solid waste produced in the process of oil exploitation, transportation, refining and oily sewage treatment. In fact, it is one of the main pollutants produced in the process of oil and gas development, storage and transportation. Below for you to say the commonly used method of sewage sludge treatment?
查看詳情 白箭頭 黑箭頭
莫尼亞

南京莫尼亞離心機科技發展有限公司

聯系人:   陳永欣 18013325671 

                 徐鋒    18013035671

售后服務: 趙士波 18013344029
電話/傳真:025-58474011
郵箱: molniya@126.com

網址:www.eclecticwhatnot.com
公司地址:江蘇省南京市六合區竹鎮工業園凌峰路71號

General Sales Agent for Iran, Iraq and Syria:

Company: ROYESH BEDONE MAX.LTD

Contact: Mr. GHASEM AMANI

Telephone number: 0098 912 111 2893

Mail box: robimaxfactory@gmail.com

莫尼亞

- 手機版  莫尼亞 -

Copyright ? 2019 南京莫尼亞離心機科技發展有限公司

網站建設:中企動力 南京

蘇ICP備2020058610號-1

SEO 標簽

幸运快3-通用APP